Inquiries are welcome; it is free!
A sample or mass production, your demand will be fulfilled.
Bendable sheathed heater
Bendable sheathed heater
#micro heater #coil heater #bendable sheathed heater
It is a sheathed heater that has the spiral heat generator placed inside the metal tube with the void filled with the optimally heat-conductive insulator (Mgo).
It is bendable, weldable, and highly heat-resistant and corrosion-resistant. Sections are divided into rectangular, square, and round ones.
Strengths of Bendable Sheathed Heaters
Indicated for square sections. Compared with a round section, a square section can better bind to the item to be heated and enables easier transmission of thermal energy accordingly.
With the bending workmanship, products of various shapes can be manufactured and it saves room.
Although a micro heater is very thin, it can accommodate an entangled heating wire and hence has very high thermal efficiency.
The types with leads are to be produced upon request.
Sections can be rectangular, square, or round.
Heaters of various outside diameters can be manufactured (an ultra-fine heater is also referred to as a micro heater).
Specifications of Standard JIADA Bendable Heaters
| Item | Description |
|---|---|
| External Tube | 304ST (anti-corrosion, processability, oxidation resistance, optimally heat-tolerating stainless steel) *To designate another material, please contact us (with minimum purchase order requirements) |
| Insulating material | Magnesium (MgO) |
| Heating wire | Nichrome round wire |
| Specifications and tolerance |
|
| Surface Temperature | 700℃ at maximum |
Specifications of Standard JIADA Sheathed Heaters
The following are the specifications of the Company's permanent standard products for which expedited shipments are possible. For customization, feel free to make your inquiries about pricing now.
Flat design for powerful adhesion and plasticity. Commonly used in plastics, rubbers, healthcare, and semi-conductor-related industries.
Composition
- PTFE lead, with a heat tolerance of up to 260℃ and normally 1m long once installed
- Protective sheath: Composite materials, with a heat tolerance of 250-300℃
- Dielectric strength 800V
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 200mm/150W | 500mm/330W |
Single-side feed-out (optional connection of a thermocouple) |
2-core/4-core | 40mm |
None J Type K Type |
| 250mm/175W | 600mm/400W | ||||
| 300mm/200W | 700mm/470W | ||||
| 350mm/225W | 800mm/550W | ||||
| 400mm/250W | 900mm/620W | ||||
| 450mm/290W | 1000mm/700W | ||||
*A/B/C/E may be tailored upon request
Composition
- PTFE lead, with a heat tolerance of up to 260℃ and normally 1m long once installed
- Protective sheath: Composite materials, with a heat tolerance of 250-300℃
- Dielectric strength 1KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 250mm/200W | 700mm/550W |
Single-side feed-out (optional connection of a thermocouple) |
2-core/4-core | 45mm |
None J Type K Type |
| 300mm/225W | 800mm/620W | ||||
| 350mm/250W | 900mm/700W | ||||
| 400mm/290W | 1000mm/850W | ||||
| 450mm/330W | 1200mm/950W | ||||
| 500mm/400W | 1400mm/1100W | ||||
| 600mm/470W | 1600mm/1200W | ||||
*A/B/C/E may be tailored upon request
Composition
- PTFE lead, with a heat tolerance of up to 260℃ and normally 1m long once installed
- Protective sheath: Composite materials, with a heat tolerance of 250-300℃
- Dielectric strength 1KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 800mm/800W | 1750mm/1600W |
Single-side feed-out (optional connection of a thermocouple) |
2-core/4-core | 45mm |
None J Type K Type |
| 1000mm/1000W | 2000mm/1800W | ||||
| 1250mm/1200W | 2250mm/2000W | ||||
| 1500mm/1400W | 2500mm/2200W | ||||
*A/B/C/E may be tailored upon request
Composition
- PTFE lead, with a heat tolerance of up to 260℃ and normally 1m long once installed
- Protective sheath: Composite materials, with a heat tolerance of 250-300℃
- Dielectric strength 1KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 600mm/550W | 1400mm/1250W |
Single-side feed-out (optional connection of a thermocouple) |
2-core/4-core | 45mm |
None J Type K Type |
| 700mm/650W | 1600mm/1400W | ||||
| 800mm/750W | 1800mm/1550W | ||||
| 900mm/850W | 2000mm/1700W | ||||
| 1000mm/950W | 2200mm/1850W | ||||
| 1200mm/1100W | 2400mm/2000W | ||||
*A/B/C/E may be tailored upon request
Greater thermal efficiency than a round section heater. Outstanding temperature uniformity and heat conductivity with significantly reduced power consumption.
Material
- PTFE lead, with a heat tolerance of up to 260℃ and normally 1M long once installed
- Protective sheath: Composite materials, with a heat tolerance of 250-300℃
- Dielectric strength 1KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 250mm/175W | 800mm/550W |
Single-side feed-out (optional connection of a thermocouple) |
2-core/4-core | 45mm |
None J Type K Type |
| 300mm/200W | 900mm/620W | ||||
| 350mm/225W | 1000mm/700W | ||||
| 400mm/250W | 1200mm/850W | ||||
| 450mm/290W | 1400mm/950W | ||||
| 500mm/330W | 1600mm/1100W | ||||
| 600mm/400W | 1800mm/1200W | ||||
| 700mm/470W | 2000mm/1350W | ||||
*A/B/C1/C2 may be tailored upon request
Composition
- PTFE lead, with a heat tolerance of up to 260℃ and normally 1M long once installed
- Protective sheath: Composite materials, with a heat tolerance of 250-300℃
- Dielectric strength 1KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 300mm/225W | 900mm/700W |
Single-side feed-out (optional connection of a thermocouple) |
2-core/4-core | 45mm |
None J Type K Type |
| 350mm/250W | 1000mm/850W | ||||
| 400mm/290W | 1200mm/950W | ||||
| 450mm/330W | 1400mm/1100W | ||||
| 500mm/400W | 1600mm/1200W | ||||
| 600mm/470W | 1800mm/1300W | ||||
| 700mm/550W | 2000mm/1500W | ||||
| 800mm/620W | -- | ||||
*A/B/C1/C2 may be tailored upon request
Composition
- Composition of insulating terminal: ceramics, silicone
- Dielectric strength 1.5KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 350mm/550W | 1000mm/1750W |
Dual-side feed-out |
1-core | 20mm/20mm |
None |
| 400mm/650W | 1050mm/1850W | ||||
| 450mm/750W | 1100mm/1950W | ||||
| 500mm/800W | 1150mm/2050W | ||||
| 550mm/900W | 1200mm/2100W | ||||
| 600mm/1000W | 1250mm/2200W | ||||
| 650mm/1100W | 1300mm/2300W | ||||
| 700mm/1200W | 1350mm/2400W | ||||
| 750mm/1300W | 1400mm/2500W | ||||
| 800mm/1350W | 1450mm/2600W | ||||
| 850mm/1450W | 1500mm/2700W | ||||
| 900mm/1550W | 1550mm/2800W | ||||
| 950mm/1650W | 1600mm/2900W | ||||
*A/B/C1/C2 may be tailored upon request
.png)
Material
- Composition of insulating terminal: ceramics, silicone
- Dielectric strength 1.5KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | C non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 500mm/1300W | 1200mm/2700W | Dual-side feed-out | 1-core | 20mm/20mm | Nope |
| 550mm/1400W | 1250mm/2800W | ||||
| 600mm/1500W | 1300mm/2900W | ||||
| 650mm/1600W | 1350mm/3000W | ||||
| 700mm/1700W | 1400mm/3100W | ||||
| 750mm/1800W | 1450mm/3200W | ||||
| 800mm/1900W | 1500mm/3300W | ||||
| 850mm/2000W | 1550mm/3400W | ||||
| 900mm/2100W | 1600mm/3500W | ||||
| 950mm/2200W | 1700mm/3700W | ||||
| 1000mm/2300W | 1800mm/3900W | ||||
| 1050mm/2400W | 1900mm/4100W | ||||
| 1100mm/2500W | 2000mm/4300W | ||||
| 1150mm/2600W | -- | ||||
*A/B/C1/C2 may be tailored upon request
Small volume,ideal for small-area heating. Flexible spatial configuration to reduce heat loss.
Composition
- PTFE lead, with a heat tolerance of up to 260C and normally 1M long once installed
- Dielectric strength 0.8KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | B non-heat-generating zon | Optional TC | |
|---|---|---|---|---|---|
| 400mm/100W | 800mm/240W | Dual-side feed-out | 1-core | 80mm/80mm | Nope |
| 450mm/120W | 900mm/260W | ||||
| 500mm/140W | 1000mm/320W | ||||
| 600mm/160W | 1200mm/400W | ||||
| 700mm/200W | -- | ||||
*A/B/E may be tailored upon request
.png)
Composition
- PTFE lead, with a heat tolerance of up to 260C and normally 1M long once installed
- Dielectric strength 0.8KV
| Length [mm]/Watts [W] | Feed-out end | Optional number of feed-out cores | B non-heat-generating zone | Optional TC | |
|---|---|---|---|---|---|
| 450mm/125W | 800mm/300W |
Dual-side feed-out |
1-core | 80mm/80mm |
None |
| 450mm/150W | 900mm/350W | ||||
| 500mm/175W | 1000mm/400W | ||||
| 600mm/200W | 1200mm/500W | ||||
| 700mm/250W | 1500mm/600W | ||||
*A/B/E may be tailored upon request